.png){kind=logo}
Acoustic Bass
Ouessant L1
​
Linen Composite ball body–
Spruce sound board - Kopodirac bracing–
Basswood neck –
Sorbus fingerboard- 22 frets -
Sorbus bridge -
860 mm scale - 34"–
2 side sound holes -
1 Bband PU + preamp -
P.U satin varnish -
​
This latest model of acoustic bass presents developments arising from my research on acoustic guitars, steel or nylon strings, prestressed bracing, double sound holes. It is equipped with an electro-acoustic system I chose for its highacoustic fidelity, the French brand AirBagC from Ischell.
​
Mahogany back and sides, spruce top, mahogany neck, ebony fingerboard and bridge, Savarez nylon strings, scale 860mm, weight : 1,8kg
​
This acoustic bass is the model I made in the 90s.
I have built a number of them, in 4, 5, and even a 6 strings.
I was already using local woods at that time, such as ash,
Walnut or cherry for bottom and sides.
This one is one of the first, it dates from 1991 - spruce top, cherry wood body, mahogany neck and ebony touch 2 octaves.
Semi-acoustic bass
Floating table
Body in linden-
Table in carbon-
Screwed Maple Neck -
Rosewood fingerboard -
Rosewood bridge -
Diap 860 mm -
1 EMG magnetic microphone
- 1 piezo system
Dual output, mono or stereo
Bass fretless 4c semi-acoustic
Short scale
Mahogany hollow body -
Table in carbon-
Neck in mahogany -
Ebony fingerboard - Ring head
Diap 800 mm -
1 micro magnetic Benedetti
- 1 piezo system
Semi-acoustic bass
Carbon table
Body in hollow mahogany -
Table in carbon-
Neck in mahogany -
Ebony fingerboard - Ring head
Diap 870 mm -
1 micro magnetic Benedetti
- 1 piezo system
This bass 4 strings is a unique piece, made of European wood
​
Ash body -
Top in maple -
3-piece handle in ash & maple -
Ebony fingerboard - Ring head
Diapers 860 mm (34 inches) -
24 frets -
2 Bartolini pickups, 1 JB & 1 Dualcoil splitable
- 3-way selector - 3-band East Equalizer
Low semi-fretted
Screwed version of the Luna
Body in cedar top in padouk-
2-piece neck in maple-
Rosewood fingerboard semi-fretted-
Diap 870 mm - -
1 pavement MM Delano
- Split + Flight -
Equalizer East 3-band -
Bass fretless, double bass head,
4 to 6 strings
​
Body in ash and elm -
3-piece handle in ash -
Ebony key, 2 octaves-
Head Double Bass
Diap 860 mm - -
2 microphones JB
- 3-position selector switch -
Equalizer East 3-band -
Special version of the Luna
​
Body in linden and limestone-
Handle 3 pieces in linden-
Rosewood fingerboard, 2 octaves-
Head 5 custom
Diap 870 mm - -
2 Picks Bartonlini
- 3-position selector switch -
Vol. + Ton-
This bass 4 strings is a unique piece, made of European wood
​
Ash body -
Top in maple -
Neck cond. 5 pieces ash / maple
Rosewood fingerboard 2 octaves
Diap 870 mm -
24 frets -
2 Pavé Bartolini
- Microphone-
East 3-band Equalizer
La Luna is my most produced bass model, since 1990, around 30 pieces, 4, 5 or 6 strings, fretted or fretless. Its 5 pieces maple and ash neck gives it the dynamics and sustain that characterizes it, and the 2 microphones splitables double coil, brings roundness and precision.
This bass 4 strings is a unique piece, entrusted to the artist N.Leonard for the painting and the graphics
Basswood body -
one piece maple neck -
Maple key "
Diapers 860 mm (34 inches) -
21 frets -
1 micro Pavé Delano splitable
- Flight + Tone + Split + switch ton
This bass 5 strings is a unique piece "custom"
​
Basswood body -
Top in maple -
3-piece neck in ash & maple -
Ebony fingerboard - Double bass head
Diap 880 mm -
24 frets -
2 Delano pickups, 1 JB & 1 Dualcoil splitable
- Balance pickups - East 3-band Equalizer
Since 1988, I have built many basses, many of which I have no photos or sound recording.
Here are a few examples.
